UL Online Certifications Directory

QMFZ2.E213588 Plastics - Component

Page Bottom

---

Plastics - Component

See General Information for Plastics - Component
LUCENT POLYMERS INC	E213588
1800 LYNCH RD
EVANSVILLE, IN 47711 USA

									H	D
		Min.		H	H	R T I			V	4	C
		Thk	Flame	W	A	Elec	Mech		T	9	T
Material Dsg	Color	mm	Class	I	I		Imp	Str	R	5	I
Polycarbonate (PC), glass reinforced, furnished as pellets.
GPC 110	BK	1.5	HB	-	-	80	80	80
GPC 120	BK	1.5	HB	-	-	80	80	80
GPC FR 510S	ALL	1.8	V-0	-	-	80	80	80
		3.4	V-0, 5VA	-	-	80	80	80
Polycarbonate (PC), furnished as pellets.
PC FR0 (f1)	ALL	1.5	V-0	-	-	105	105	105
		3.2	V-0, 5VA	-	-	105	105	105
PC FR2	ALL	1.5	V-2	-	-	80	80	80
Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS), furnished as pellets.
PC / ABS FR0	ALL	1.5	V-0	-	-	60	60	60
Polycarbonate/Polybutylene Terephthalate (PC/PBT), furnished as pellets.
PBT G10 SE5 BK
	BK	2.0	V-0	-	-	75	75	75
		2.5	V-0, 5VA	-	-	75	75	75
		3.0	V-0	-	-	75	75	75
XNY 173U	ALL	1.5	HB	-	-	75	75	75
		3.0	HB	-	-	75	75	75
Polyethylene Terephthalate (PET), glass reinforced, furnished as pellets.
GPT FR5(a)	NC, BK	1.5	V-0	-	-	75	75	75
GPT FR515	NC, BK	1.5	V-0	-	-	75	75	75
GPT FR545	NC, BK	1.5	V-0	-	-	75	75	75
Polypropylene (PP), mineral reinforced, furnished as pellets.
CPP 126HB NA	NC	1.5	HB	-	-	65	65	65

(a) - a two-digit number between 15 and 45 representing glass percentage

(f1) - Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.

Marking: Company name and material designation on container, wrapper or finished part.

---

Questions?

Notice of Disclaimer

Page Top

®

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2007 Underwriters Laboratories Inc.®"